Pay in installments of $5.39 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 14 - Aug 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
output buffer pedal Buffer+ Stereo – Empress Effects IncOverview The Empress Buffer+ Stereo was designed to be the complete I O interface for your pedalboard, all while maintaining the highest fidelity of your guitars' signal. Signal loss due to long. un buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the Buffer+ Stereo is to eliminate this signal loss, ensuring that your tone is unchanged by your cables. We've incorporated all the features of our Buffer+
Overview
The Empress Buffer+ Stereo was designed to be the complete I/O interface for your pedalboard, all while maintaining the highest fidelity of your guitars' signal.Signal loss due to long. un-buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the Buffer+ Stereo is to eliminate this signal loss, ensuring that your tone is unchanged by your cables.
We've incorporated all the features of our Buffer+ such as the foot-switchable boost, input padding, noise filters, and variable input loading, as well as a ton of additional features such as input metering and clip level indicators, AB/AY switching, external switch control, and of course full stereo in/out connectivity.
On top of all that, we've added 12 different operating modes, each with its own unique signal routing to provide maximum versatility and adaptability to just about any rig you can throw at it. Whether you're connecting stereo effects out to stereo amps, parallel mono effects chains, dual instruments to switch between, or effects in front of your amp as well as the fx loop, the Buffer+ Stereo has got you covered.
Video
Features
- All Analog Signal Path - No digitals in here!
- Switchable Boost - Dial in up to 30dB of clean boost and switch on and off with the soft touch foot switch, or optional external footswitch.
- AB/ABY Switching - Use the onboard footswitch to AB or AY the outputs, AB the inputs for instrument switching, or even bypass your amp's effects loop.
- 12 Different Operating Modes - Want to sum stereo effects to dual mono? Maybe sum mono effects to run in parallel? How about buffer effects in front, and also your amp's fx loop? User configurable internal signal routing lets you do all of this and more.
- Input Metering - LED meters on all inputs to show the incoming signal and to alert you of clipping. Also great for troubleshooting!
- Tuner Mute - Hold the footswitch for a second to mute the amp output for tuning, or use an external footswitch to mute the output instantly.
- Noise Filters - Similar to Dolby's noise filter technology, choose between two different noise filters to remove any unwanted noise from your effects chain.
- Input Pad - Pad the input by either 6dB or 12dB. Great for matching output levels of different instruments, or avoiding clipping from a hot amp fx loop.
- Input Loading - Load down your pickups a little, a lot, or not at all. It's up to you.
- Transformer Isolated Output - Avoid ground loops when connecting to multiple amps or sources. Polarity can also be inverted to maintain phase between stereo amps.
- External Footswitch Control - Connect an external footswitch to activate the boost or instantly mute the ouput for tuning, to allow the onboard switch to be used for AB/AY switching.
Soundclips
Specifications
| Input Impedance 1 | 10kΩ - 1MΩ |
| Input Impedance 2 | 1MΩ |
| Output Impedance 1 | 47Ω |
| Output Impedance 2 | 600Ω |
| Frequency Response (-3dB) | 20Hz - 38kHz |
| THD | 0.02% |
| Noise | -104dB |
| Input Voltage | 9VDC |
| Required Current | 150mA |
| Power Input Connector | 2.1mm Barrel Connector |
| Height (enclosure only) | 1.5" |
| Height (including controls) | 2" |
| Length | 4.5" |
| Width | 3.5" |
| Weight | 12.5oz |
- Mode Selector
- Mode 1
- Mode 2
- Mode 3
- Mode 4
- Mode 5
- Mode 6
- Mode 7
- Mode 8
- Mode 9
- Mode 10
- Mode 11
- Mode 12
Find Your Mode
Answer these simple questions to find out which mode is right for you.| How many instruments and amps are you using? |
Mode 1: Un-summed Loop Ins
Mode 1 is the standard operating mode for a stereo set-up. Here's how the signal is routed:
- In 1 and In 2 are routed to loops outs 1 and 2 respectively.
- In 1 also feeds the tuner output
- if nothing is plugged in In 2, then In 1 is routed to both outputs.
- In the loop, place your stereo effects chain and return back into loop ins 1 & 2.
- Signal from the loops are buffered and routed to outputs 1 and 2.
* If the loop ins are not connected, then the signal from the inputs are routed directly to the amp outputs and if In 2 is also not connected, In 1 will be routed to both outputs.
You could use this mode to do a wet/dry set-up.
Another great way to use this mode is in the recording studio. Using a mono pedal chain, send out 1 to your amp as normal, but send out 2 to your soundcard to record a DI signal of the guitar that can be used later for re-amping. This output will be connected directly from In 1, because In 2 and Loop 2 in are both not connected.
- In 1 and In 2 are routed to loops outs 1 and 2 respectively.
- In 1 also feeds the tuner output
- if nothing is plugged in In 2, then In 1 is routed to both outputs.
- In the loop, place your stereo effects chain and return back into loop ins 1 & 2.
- Signal from the loops are buffered and routed to outputs 1 and 2.
* If the loop ins are not connected, then the signal from the inputs are routed directly to the amp outputs and if In 2 is also not connected, In 1 will be routed to both outputs.
You could use this mode to do a wet/dry set-up.
Another great way to use this mode is in the recording studio. Using a mono pedal chain, send out 1 to your amp as normal, but send out 2 to your soundcard to record a DI signal of the guitar that can be used later for re-amping. This output will be connected directly from In 1, because In 2 and Loop 2 in are both not connected.
The Footswitch can perform 1 of 3 functions.
- Boost applies up to 30dB of clean boost right before the output, and will affect both outputs in this mode.
- in A/B mode, the stompswitch toggles between out 1 and out 2.
- in A/Y mode, the stompswitch toggles between out 1, and both outputs being active.
Mode 2: Summed Loop Ins
Mode 2 uses summing to take stereo effects and bring them back to a mono output. Perhaps the most useful case for this mode would be for someone who sometimes runs a stereo rig, but also plays gigs with a mono rig. You could leave your pedalboard connected in a stereo configuration and just switch over to mode 2 for gigs with only 1 amp.
Here's how the signal is routed:
- In 1 and In 2 are routed to loops outs 1 and 2 respectively.
- In 1 also feeds the tuner output
- if nothing is plugged in In 2, then In 1 is routed to both outputs.
- In the loop, place your stereo effects chain and return back into loop ins 1 & 2.
- Signal from loops are buffered, then summed together, and routed to Both outputs.
Another great way to use this mode in the recording studio, is to send Out 1 to your amp as normal, but send Out 2 to your sound-card to record a DI signal of the guitar that can be used later for re-amping.
Here's how the signal is routed:
- In 1 and In 2 are routed to loops outs 1 and 2 respectively.
- In 1 also feeds the tuner output
- if nothing is plugged in In 2, then In 1 is routed to both outputs.
- In the loop, place your stereo effects chain and return back into loop ins 1 & 2.
- Signal from loops are buffered, then summed together, and routed to Both outputs.
Another great way to use this mode in the recording studio, is to send Out 1 to your amp as normal, but send Out 2 to your sound-card to record a DI signal of the guitar that can be used later for re-amping.
The Footswitch can perform 1 of 3 functions.
- Boost will affect both outputs in this mode.
- in A/B mode, the stompswitch toggles between Out 1 and Out 2 .
- in A/Y mode, the stompswitch toggles between Out 1, and both outputs being active.
Mode 3: Loop In 1 Only
Mode 3 is designed for using a mono effects chain with 2 outputs.
- Only In 1 is used in this mode
- Signal flows from In 1, is buffered and runs to loop out 1.
- In 1 also feeds the tuner output
- In the loop, place all of your mono pedal and return back into loop in 1.
- Signal from loop in 1 is buffered, then routed to Both outputs.
Another great way to use this mode in the recording studio, is to send Out 1 to your amp as normal, but send Out 2 to your sound-card to record a DI signal of the guitar that can be used later for re-amping. This DI Signal would also have any of the effects you applied in the loop.
- Only In 1 is used in this mode
- Signal flows from In 1, is buffered and runs to loop out 1.
- In 1 also feeds the tuner output
- In the loop, place all of your mono pedal and return back into loop in 1.
- Signal from loop in 1 is buffered, then routed to Both outputs.
Another great way to use this mode in the recording studio, is to send Out 1 to your amp as normal, but send Out 2 to your sound-card to record a DI signal of the guitar that can be used later for re-amping. This DI Signal would also have any of the effects you applied in the loop.
The Footswitch can perform 1 of 3 functions.
- Boost will affect both outputs in this mode.
- in A/B mode, the stompswitch toggles between Out 1 and Out 2 .
- in A/Y mode, the stompswitch toggles between Out 1, and both outputs being active.
Mode 4: Un-summed/Summed Loop Ins Combination
Mode 4 lets you run a summed signal to 1 amp then switch to a stereo signal to both amps using the AY stompswitch.
- In 1 and In 2 are routed to loops outs 1 and 2 respectively.
- In 1 also feeds the tuner output
- if nothing is plugged in In 2, then In 1 is routed to both outputs.
- In the loop, place your stereo effects chain and return back into loop ins 1 & 2.
- With the stompswitch set to boost, this mode behaves like mode 1 and routes loop in 1 to Amp out 1 and loop in 2 to amp out 2. Both signals are buffered at the loop ins and the
- boost is applied as the last thing in the chain before the amp outs.
- In A/B mode, the stompswitch toggles between sending a summed signal to Out 1 and Out 2.
- For A/Y mode, in the A state, the buffer sends a summed signal to Out 1. The Y state sends a stereo signal to both outputs
- In 1 and In 2 are routed to loops outs 1 and 2 respectively.
- In 1 also feeds the tuner output
- if nothing is plugged in In 2, then In 1 is routed to both outputs.
- In the loop, place your stereo effects chain and return back into loop ins 1 & 2.
- With the stompswitch set to boost, this mode behaves like mode 1 and routes loop in 1 to Amp out 1 and loop in 2 to amp out 2. Both signals are buffered at the loop ins and the
- boost is applied as the last thing in the chain before the amp outs.
- In A/B mode, the stompswitch toggles between sending a summed signal to Out 1 and Out 2.
- For A/Y mode, in the A state, the buffer sends a summed signal to Out 1. The Y state sends a stereo signal to both outputs
Mode 5: Loop Select
Loop select mode lets you do some cool things like run 2 effect chains in parallel, or switch between 2 different effect chains.
- Only In 1 is used in this mode
- Signal flows from In 1, is buffered and runs to both loop out 1 and 2.
- In 1 also feeds the tuner output
- This mode is designed to be used with 2 mono effects chains.
- Effects chain 1 runs from loop out 1, though your effects, and back into loop in 1.
- Effects chain 2 runs from loop out 2, though your effects, and back into loop in 2.
- In A/B mode, the stompswitch toggles between Loop 1 and Loop 2. The selected loop is sent to both outputs
- For A/Y mode, in the A state, Loop 1 is used and set to both outputs just like in A/B mode. The Y state combines the signals from both loops and sends this summed signal to both outputs. Blending the 2 signals in parallel.
- With the stompswitch set to boost, this mode behaves like the Y state, summing the 2 effects loops in parallel and sending this signal out to both amp outputs.
- boost is applied as the last thing in the chain before the amp outs.
- Only In 1 is used in this mode
- Signal flows from In 1, is buffered and runs to both loop out 1 and 2.
- In 1 also feeds the tuner output
- This mode is designed to be used with 2 mono effects chains.
- Effects chain 1 runs from loop out 1, though your effects, and back into loop in 1.
- Effects chain 2 runs from loop out 2, though your effects, and back into loop in 2.
- In A/B mode, the stompswitch toggles between Loop 1 and Loop 2. The selected loop is sent to both outputs
- For A/Y mode, in the A state, Loop 1 is used and set to both outputs just like in A/B mode. The Y state combines the signals from both loops and sends this summed signal to both outputs. Blending the 2 signals in parallel.
- With the stompswitch set to boost, this mode behaves like the Y state, summing the 2 effects loops in parallel and sending this signal out to both amp outputs.
- boost is applied as the last thing in the chain before the amp outs.
Mode 6: Loop Summing Select
This mode allows for running 2 mono effects chains and switching between running a summed signal or sending each loop to its own amp.
- Only In 1 is used in this mode
- Signal flows from In 1, is buffered and runs to both loop out 1 and 2.
- In 1 also feeds the tuner output
- This mode is designed to be used with 2 mono effects chains.
- Effects chain 1 runs from loop out 1, though your effects, and back into loop in 1.
- Effects chain 1 runs from loop out 2, though your effects, and back into loop in 2.
- the stompswitch toggles between summed and unsummed states.
- In state A, Loop 1 and Loop 2 are summed in parallel and send to both amp outputs.
- In state B, Loop 1 is sent to amp out 1 and Loop 2 is sent to amp out 2.
- the stompswitch function toggle switch is not used in this mode because the stompswitch always funtions as an A/B switch.
- boost is applied as the last thing in the chain before the amp outs.
- Only In 1 is used in this mode
- Signal flows from In 1, is buffered and runs to both loop out 1 and 2.
- In 1 also feeds the tuner output
- This mode is designed to be used with 2 mono effects chains.
- Effects chain 1 runs from loop out 1, though your effects, and back into loop in 1.
- Effects chain 1 runs from loop out 2, though your effects, and back into loop in 2.
- the stompswitch toggles between summed and unsummed states.
- In state A, Loop 1 and Loop 2 are summed in parallel and send to both amp outputs.
- In state B, Loop 1 is sent to amp out 1 and Loop 2 is sent to amp out 2.
- the stompswitch function toggle switch is not used in this mode because the stompswitch always funtions as an A/B switch.
- boost is applied as the last thing in the chain before the amp outs.
Mode 7: Instrument Select, Mono Return to Both Outs
This mode is designed for using multiple instruments through the same mono effects chain, out to either 1 or 2 amps.
- Plug your 2 instruments into the two inputs. In 1 and In 2.
- The active instrument input gets routed to Loop out 2.
- The active Input is also feed the tuner output
- Pressing the stompswitch will select which instrument is active.
- This mode is designed to be used with a mono effects chain.
- Signal is sent out Loop 2 out, then place your effects chain, and return back into Loop 2 In.
- From loop in 2, signal is routed to both outputs.
- boost is applied as the last thing in the chain before the amp outs.
- the stompswitch function toggle switch is not used in this mode because the stompswitch always funtions as an instrument select switch.
- Plug your 2 instruments into the two inputs. In 1 and In 2.
- The active instrument input gets routed to Loop out 2.
- The active Input is also feed the tuner output
- Pressing the stompswitch will select which instrument is active.
- This mode is designed to be used with a mono effects chain.
- Signal is sent out Loop 2 out, then place your effects chain, and return back into Loop 2 In.
- From loop in 2, signal is routed to both outputs.
- boost is applied as the last thing in the chain before the amp outs.
- the stompswitch function toggle switch is not used in this mode because the stompswitch always funtions as an instrument select switch.
Mode 8: Instrument Select, Stereo Return & Summed Loops
This mode is designed for using multiple instruments through the same stereo effects chain, out to either 1 or 2 amps.
- Plug your 2 instruments into the two inputs. In 1 and In 2.
- The active instrument input gets routed to Loop out 2.
- The active Input is also feed the tuner output
- Pressing the stompswitch will select which instrument is active.
- This mode is designed to be used with a stereo effects chain.
- Signal is sent out Loop 2 out, then place your stereo effects chain, and return back into Loop 1 & 2 In.
- From the loop inputs, signal is summed then routed to both outputs.
- boost is applied as the last thing in the chain before the amp outs.
- the stompswitch function toggle switch is not used in this mode because the stompswitch always funtions as an instrument select switch.
- Plug your 2 instruments into the two inputs. In 1 and In 2.
- The active instrument input gets routed to Loop out 2.
- The active Input is also feed the tuner output
- Pressing the stompswitch will select which instrument is active.
- This mode is designed to be used with a stereo effects chain.
- Signal is sent out Loop 2 out, then place your stereo effects chain, and return back into Loop 1 & 2 In.
- From the loop inputs, signal is summed then routed to both outputs.
- boost is applied as the last thing in the chain before the amp outs.
- the stompswitch function toggle switch is not used in this mode because the stompswitch always funtions as an instrument select switch.
Mode 9: Instrument Select, Un-summed Loops
This mode is designed for using multiple instruments through the same stereo effects chain, then out 2 amps run in stereo.
- Plug your 2 instruments into the two inputs. In 1 and In 2.
- The active instrument input gets routed to Loop out 2.
- The active Input is also feed the tuner output
- Pressing the stompswitch will select which instrument is active.
- This mode is designed to be used with a stereo effects chain.
- Signal is sent out Loop 2 out, then place your stereo effects chain, and return back into Loop 1 & 2 In.
- From the loop inputs, signal is routed from loop in 1 to amp out 1,and from loop in 2 to amp out 2.
- boost is applied as the last thing in the chain before the amp outs.
- the stompswitch function toggle switch is not used in this mode because the stompswitch always funtions as an instrument select switch.
- Plug your 2 instruments into the two inputs. In 1 and In 2.
- The active instrument input gets routed to Loop out 2.
- The active Input is also feed the tuner output
- Pressing the stompswitch will select which instrument is active.
- This mode is designed to be used with a stereo effects chain.
- Signal is sent out Loop 2 out, then place your stereo effects chain, and return back into Loop 1 & 2 In.
- From the loop inputs, signal is routed from loop in 1 to amp out 1,and from loop in 2 to amp out 2.
- boost is applied as the last thing in the chain before the amp outs.
- the stompswitch function toggle switch is not used in this mode because the stompswitch always funtions as an instrument select switch.
Mode 10: Instrument Select - Seperate rigs, Shared effects
The rig select mode allows for 2 instrument and amp set-ups to share the same effects chain. This mode is great for side men or multi-instrumentalists. It allows you to have 2 separate rigs, that can share effects, minimizing what you need to travel with. Here, we showed it with an electric guitar rig and an acoustic guitar rig, but this could be used for any two instruments.
- Plug your 2 instruments into the two inputs. In 1 and In 2.
- The active instrument input gets routed to Loop out 2.
- The active Input is also feed the tuner output
- Signal is sent out Loop 2 out. In the loop, place your effects chain, and return back into Loop 2 In.
- From Loop 2 in, signal is routed to the active amp output.
- Pressing the stompswitch will select which rig is active. Here we are using rig 1, so instrument 1 and amp 1 are active, and in rig 2, instrument 2 and amp 2 are active
- boost is applied as the last thing in the chain before the amp outs.
- the stompswitch function toggle switch is not used in this mode because the stompswitch always functions as a rig select switch.
- Plug your 2 instruments into the two inputs. In 1 and In 2.
- The active instrument input gets routed to Loop out 2.
- The active Input is also feed the tuner output
- Signal is sent out Loop 2 out. In the loop, place your effects chain, and return back into Loop 2 In.
- From Loop 2 in, signal is routed to the active amp output.
- Pressing the stompswitch will select which rig is active. Here we are using rig 1, so instrument 1 and amp 1 are active, and in rig 2, instrument 2 and amp 2 are active
- boost is applied as the last thing in the chain before the amp outs.
- the stompswitch function toggle switch is not used in this mode because the stompswitch always functions as a rig select switch.
Mode 11: FX Loop - boost at amp input
The FX loop modes combine front end pedals and your FX loop into 1 interface.
Front End
- Signal flows from In 1, is buffered and runs to loop out 1.
- In 1 also feeds the tuner output
- Signal is sent out Loop 1 out. In the loop, place your front end effects chain, and return back into Loop 2 In. Generally, all your gain pedals would go here.
- From Loop 2 in, signal feeds amp out 2.
- From Out 2, plug into the front of your amp.
FX loop.
- The FX loop send plugs into In 2.
- In 2 is routed to Loop out 1.
- In the loop, place for FX chain for the FX loop, generally this would be time based effects like delay and reverb. Return from your effects into Loop in 1.
- Loop in 1 is routed to Amp out 1.
- From amp out 1, return to the FX loop return on your amp.
Front End
- Signal flows from In 1, is buffered and runs to loop out 1.
- In 1 also feeds the tuner output
- Signal is sent out Loop 1 out. In the loop, place your front end effects chain, and return back into Loop 2 In. Generally, all your gain pedals would go here.
- From Loop 2 in, signal feeds amp out 2.
- From Out 2, plug into the front of your amp.
FX loop.
- The FX loop send plugs into In 2.
- In 2 is routed to Loop out 1.
- In the loop, place for FX chain for the FX loop, generally this would be time based effects like delay and reverb. Return from your effects into Loop in 1.
- Loop in 1 is routed to Amp out 1.
- From amp out 1, return to the FX loop return on your amp.
The stompswitch can perform 2 functions, Boost and AY switching. AB switching is not used in these modes.
- In the AY setting, the stomp switch will turn on and off your FX loop. Your front end effects will always be engaged.
- The Boost will be applied directly in front of your amp after your front end effects.
Mode 12: FX Loop - boost at FX return
The FX loop modes combine front end pedals and your FX loop into 1 interface.
Front End
- Signal flows from In 1, is buffered and runs to loop out 1.
- In 1 also feeds the tuner output
- Signal is sent out Loop 1 out. In the loop, place your front end effects chain, and return back into Loop 2 In. Generally, all your gain pedals would go here.
- From Loop 2 in, signal feeds amp out 2.
- From Out 2, plug into the front of your amp.
FX loop.
- The FX loop send plugs into In 2.
- In 2 is routed to Loop out 1.
- In the loop, place for FX chain for the FX loop, generally this would be time based effects like delay and reverb. Return from your effects into Loop in 1.
- Loop in 1 is routed to Amp out 1.
- From amp out 1, return to the FX loop return on your amp.
Front End
- Signal flows from In 1, is buffered and runs to loop out 1.
- In 1 also feeds the tuner output
- Signal is sent out Loop 1 out. In the loop, place your front end effects chain, and return back into Loop 2 In. Generally, all your gain pedals would go here.
- From Loop 2 in, signal feeds amp out 2.
- From Out 2, plug into the front of your amp.
FX loop.
- The FX loop send plugs into In 2.
- In 2 is routed to Loop out 1.
- In the loop, place for FX chain for the FX loop, generally this would be time based effects like delay and reverb. Return from your effects into Loop in 1.
- Loop in 1 is routed to Amp out 1.
- From amp out 1, return to the FX loop return on your amp.
The stompswitch can perform 2 functions, Boost and AY switching. AB switching is not used in these modes.
- In the AY setting, the stomp switch will turn on and off your FX loop. Your front end effects will always be engaged.
- The boost is applied at the FX loop return.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 29 reviews
Sort
Product Reviews
★★★★★ 5
I love this mixer
Size: Basic Frother, Color: Black
I love this mixer. I don't know how we got along before we had this. We have had this small hand mixer for 2 years, using it several times every day, day after day and it finally stopped working and I am ordering another one right now. I can't live without it. I make our bullet coffee with it. My wife makes her morning shake with it. I could go on and on but I need to get another one ordered right now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Works perfectly!
Size: Basic Frother, Color: Silver
The first unit I got, the charging LED was not working so I don't know if the unit is charged. I returned the unit back to Amazon and got a brand new unit the next day. Great job, Amazon! The 2nd unit has been perform perfectly. I use it to whisk eggs in the morning to make French toasts, waffles, pancakes. All comes out perfect! Also, the mike froth for my morning latte and cappuccino. Don't under estimate this small unit, the spin is fast for high!!!
I saw some negative review on the durability of the unit. I hope this is not the case. I'll update if anything changes. As for now, highly recommended!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 5
Great find!
Size: Basic Frother, Color: Black
This is frother is compact what does that meanand strong, and easy to keep
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2026
★★★★★ 5
Mixes my protein shake powder
Color: Blue
My husband and I both drink protein shakes daily. We have vortex mixers that work great, but they are plastic and getting old, and really needed to be replaced.
In an effort to reduce microplastics in our lives, I am trying to use less plastic mixing cups. I couldn't find anything small enough (other than regular blenders) with glass and metal parts that would work well for us.
During my search on here, several frothers showed up. This one caught my eye because of the amount of sales, quick delivery, and of course, decent pricing. Some of the reviews had me a little skeptical, and time will tell regarding the longevity, but so far I am pleased.
My protein powders are on the heavy side, but this little frother really gets the job done. Instead of having to use separate mixing cups (saving me on dishwashing), I just use my morning coffee cup (it's big enough) to mix my protein shake in. My husband just uses a regular glass.
Neither of us can believe the power this little thing has. We are getting smooth shakes!
Here is what I really like about it: It is powerful and mixes well; the frother is metal and not plastic; it cleans extremely easy; after making several shakes the battery has not died; can be used in glasses, coffee cups, even disposable cups (when we buy donut shop coffee); and I love the little stand which takes up barely any counter space. Less plastic, less clean-up, dependable (so far), and small, making it convenient even for travel.
I'm really glad I got this, and hope it will last. One last thing, do not turn it on while cleaning under running water. (Yes, you can laugh.)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2026
★★★★★ 5
Powerful frother with a long rechargeable battery life
Color: Black
After purchasing three of the battery operated frothers. I finally found this amazing frother. It is very powerful so you do have to be careful not to slosh liquid out of your cup when you’re using it. But I have found it helps if you rotate the frother in a stirring motion while you are using it. That really helps keep the liquid from overflowing out of the cup. It has a sleek design and is rechargeable and the charge less about two weeks.I love this one so much. I take it with me when I travel. I actually left my original one at my mother’s house the last time I visited her and have ordered another one for my house. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026